Platinum Cured Liquid Silicone Rubber 15 Shore A (1A:1B) for Mold Making | Candle, Resin, Concrete & Soap Silicone Rubber by Jindeal

Product Short Description

Jindeal Platinum Cured Liquid Silicone Rubber 15 Shore A is a premium 1A:1B mold making silicone designed for candles, resin art, concrete art, soap, gypsum, wax, jesmonite-style crafts and DIY mold production. It gives flexible, smooth, durable and high-detail molds with very low shrinkage and easy demolding.

✅ 15 Shore A Soft Flexible Grade
✅ 1A:1B Easy Mixing Ratio
✅ Platinum / Addition Cure Silicone
✅ Smooth High-Detail Finish
✅ Low Shrinkage
✅ Excellent Tear Strength
✅ Ideal for Silicone Mold Making
✅ Available in 500ml+500ml and 1L+1L Kits

Main Description

Create professional-quality molds with Jindeal Platinum Cured Liquid Silicone Rubber 15 Shore A, a premium addition-cure silicone rubber specially made for artists, candle makers, resin creators, concrete craft makers, soap makers and professional mold manufacturers.

This silicone rubber cures at room temperature and provides a soft, flexible, tear-resistant mold with excellent detail reproduction. The 15 Shore A hardness makes it suitable for molds where flexibility, easy demolding and fine detailing are important.

It is ideal for making molds for candles, resin products, concrete décor, gypsum art, soap, wax, clay, figurines, trays, planters, coasters, candle jars and decorative craft items.

Key Features

• Platinum cured silicone rubber
• Addition cure system
• 1A:1B mixing ratio
• 15 Shore A hardness
• Soft and flexible after curing
• Excellent tear strength
• Very low shrinkage
• Smooth surface finish
• Captures fine details
• Easy demolding
• Long mold life
• Suitable for professional use
• Good for repeated casting
• Room temperature curing
• Suitable for hobby and commercial production

Ideal For Making Molds For

• Candle molds
• Resin molds
• Concrete art molds
• Soap molds
• Wax molds
• Gypsum molds
• Jesmonite-style craft molds
• Planter molds
• Coaster molds
• Tray molds
• Figurine molds
• Decorative bowl molds
• Sculpture molds
• Home décor molds
• DIY craft molds

Technical Specifications

How To Use

1. Measure equal quantity of Part A and Part B.
2. Mix slowly and thoroughly for 2–3 minutes.
3. Scrape the sides and bottom of the mixing container.
4. Pour slowly over the master model from one side.
5. Keep the mold in a clean, dust-free place.
6. Allow it to cure fully before demolding.

Best Practice Tips

• Use a digital weighing scale for accurate 1:1 mixing.
• Mix slowly to reduce bubbles.
• Vacuum degassing is recommended for professional results.
• Avoid sulfur clay, latex, amines and contaminated surfaces, as these may stop curing.
• Always do a small test before bulk mold making.
• Store both parts tightly closed in a cool and dry place.